Spoiler portbagaj Maxton Design tip aripă din fibră de carbon cu stop LED pentru BMW Seria 5 G30 Sedan / M5 F90 Sedan (2017-2024)
Spoiler portbagaj Maxton Design tip aripă din fibră de carbon cu stop LED pentru BMW Seria 5 G30 Sedan / M5 F90 Sedan (2017-2024)
SKU:AL-159-CAP1G
În stoc

All Maxton Design spoilers are of extremely high quality. They are made of top-grade ABS plastic, intended for the automotive industry. All of them stand out for their increased strength and flexibility. The high-tech components also have improved resistance to chemicals, heat, wear, sunlight, and weathering.
Installation:
Assembly is extremely simple, with no need to modify the car or the spoiler. Each kit contains detailed installation instructions.
Fit verification: Measure the distances on both sides of the spoiler, center it on the trunk, and mark the reference points.
Surface preparation: Clean the surface with a slightly damp cloth, and if necessary, use a cleaning agent.
Spoiler mounting: Remove the film from the 3M adhesive tape and mount the spoiler, following the measurements taken in step 1.
Installation check: After assembly, verify that the 3M tape is correctly fixed over the entire surface.
This accessory model is designed for trunk mounting. The Maxton Design spoiler changes the appearance of the trunk, improving the car's grip and stability. Each product fits perfectly on the trunk contours.
The accessory is equipped with 3M self-adhesive tape, which ensures secure fastening to the trunk.
Attention!
Before assembly, thoroughly clean the trunk surface.
The kit contains:
Spoiler – 1 piece.
Assembly instructions.
Material: high-quality carbon fiber.

Fitment Assurance by Rednic Performance
Verificam compatibilitatea inainte de expediere. Daca nu esti sigur ca produsul se potriveste, trimite seria VIN sau o poza cu masina. Confirmam compatibilitatea manual.
In cazul rar al unei incompatibilitati cauzate de identificarea gresita a produsului din partea noastra, oferim schimb sau retur.
Specificatii
Material
Carbon fiber
Montaj / Utilizare
Ghidurile pot fi gasite la finalul descrierii produsului.
Descriere

All Maxton Design spoilers are of extremely high quality. They are made of top-grade ABS plastic, intended for the automotive industry. All of them stand out for their increased strength and flexibility. The high-tech components also have improved resistance to chemicals, heat, wear, sunlight, and weathering.
Installation:
Assembly is extremely simple, with no need to modify the car or the spoiler. Each kit contains detailed installation instructions.
Fit verification: Measure the distances on both sides of the spoiler, center it on the trunk, and mark the reference points.
Surface preparation: Clean the surface with a slightly damp cloth, and if necessary, use a cleaning agent.
Spoiler mounting: Remove the film from the 3M adhesive tape and mount the spoiler, following the measurements taken in step 1.
Installation check: After assembly, verify that the 3M tape is correctly fixed over the entire surface.
This accessory model is designed for trunk mounting. The Maxton Design spoiler changes the appearance of the trunk, improving the car's grip and stability. Each product fits perfectly on the trunk contours.
The accessory is equipped with 3M self-adhesive tape, which ensures secure fastening to the trunk.
Attention!
Before assembly, thoroughly clean the trunk surface.
The kit contains:
Spoiler – 1 piece.
Assembly instructions.
Material: high-quality carbon fiber.
Hotspot
Cele mai populare produse din aceste categorii
-
Bodykit-uri Personalizate
Transforma-ti masina cu bodykit-uri premium. Alege dintr-o gama variata de splittere, praguri, difusere si widebody kits pentru un look agresiv si unic.
-
Performanta si Design
Nu este vorba doar de estetica – bodykit-urile noastre sunt gandite si pentru aerodinamica si performanta. Stil si functionalitate intr-un singur pachet!
-
Livrare Rapida si Sigura
Comenzile sunt procesate rapid, iar livrarea este sigura. Ne asiguram ca produsele ajung la tine in stare perfecta, gata de montaj!
-
In Curand: Jante Premium
Completeaza look-ul masinii tale cu jante premium. Pregatim o colectie exclusiva pentru un stil agresiv si performanta sporita!
Despre noi
Pasiune pentru Tuning si Performanta
La Rednic Performance, transformam masinile si motocicletele in opere de arta pe patru roti. Oferim o gama variata de bodykit-uri premium, atent selectate pentru a combina performanta cu un design agresiv si exclusivist. Indiferent daca vrei un look subtil sau un stil widebody extrem, avem solutia perfecta pentru tine.
Ne asiguram ca fiecare comanda este procesata rapid si livrata in siguranta, astfel incat sa iti poti echipa autovehiculul fara griji.
In curand! Vom lansa o colectie exclusiva de jante premium, perfecte pentru un look complet. Ramai conectat si fii printre primii care descopera noile produse!
Intrebari frecvente
Este bodykit-ul compatibil cu modelul si anul masinii mele?
Aceste detalii pot fi confirmate direct in pagina produsului. Acolo vei gasi mentionat atat modelul exact, cat si anul productiei.
Totusi, daca nu te descurci, contacteaza-ne pe WhatsApp pentru asistenta.
Necesita modificari suplimentare sau se monteaza direct pe masina?
Unele bodykit-uri sunt bolt-on (se monteaza direct), in timp ce altele pot necesita ajustari minore sau modificari pentru o potrivire perfecta.
Pot instala bodykit-ul singur sau am nevoie de un specialist?
Instalarea poate varia in functie de bodykit. Unele modele se pot monta acasa cu unelte de baza, dar altele necesita experienta unui profesionist. Va rugam sa verificati sectiunea "Montaj" din pagina produsului pentru informatii exacte.
Se poate monta peste elementele originale sau trebuie inlocuite?
Depinde de designul bodykit-ului. Unele se monteaza peste elementele originale, altele le inlocuiesc complet.
Din ce materiale sunt fabricate bodykit-urile?
Acest detaliu este mentionat in pagina fiecarui produs. Totusi, cele mai populare materiale sunt fibra de carbon, fibra de sticla, poliuretan si ABS.
Recenzii
-
Exact ce aveam nevoie! Se potriveste perfect pe Yamaha mea si materialul e surprinzator de gros pentru pretul asta. O folosesc zilnic si rezista bine la ploaie si praf. Livrare rapida, ambalata corect. Recomand fara dubii!
Mihai H. -
Am comandat bodykit-ul Larte Performance pentru BMW X5M LCI si sunt extrem de multumit! Calitatea este impecabila, fiecare detaliu este lucrat perfect, iar montajul s-a facut fara probleme. Masina arata absolut spectaculos si atrage toate privirile! Recomand cu incredere acest magazin pentru seriozitate si produse premium.
Ghita S. -
Nu suport odorizantele care miros a chimicale ieftine. Asta chiar e altceva... elegant, fresh si tine mult. Am primit si un sticker bonus in colet. Detalii mici, dar conteaza. Am comandat deja inca doua ca sa am pe viitor 😅 Singurul minus: mi-ar fi placut sa aiba si o varianta cu prindere pe grila, nu doar de oglinda.
Valeriu L.
Spoiler portbagaj Maxton Design tip aripă din fibră de carbon cu stop LED pentru BMW Seria 5 G30 Sedan / M5 F90 Sedan (2017-2024)
Spoiler portbagaj Maxton Design tip aripă din fibră de carbon cu stop LED pentru BMW Seria 5 G30 Sedan / M5 F90 Sedan (2017-2024)

All Maxton Design spoilers are of extremely high quality. They are made of top-grade ABS plastic, intended for the automotive industry. All of them stand out for their increased strength and flexibility. The high-tech components also have improved resistance to chemicals, heat, wear, sunlight, and weathering.
Installation:
Assembly is extremely simple, with no need to modify the car or the spoiler. Each kit contains detailed installation instructions.
Fit verification: Measure the distances on both sides of the spoiler, center it on the trunk, and mark the reference points.
Surface preparation: Clean the surface with a slightly damp cloth, and if necessary, use a cleaning agent.
Spoiler mounting: Remove the film from the 3M adhesive tape and mount the spoiler, following the measurements taken in step 1.
Installation check: After assembly, verify that the 3M tape is correctly fixed over the entire surface.
This accessory model is designed for trunk mounting. The Maxton Design spoiler changes the appearance of the trunk, improving the car's grip and stability. Each product fits perfectly on the trunk contours.
The accessory is equipped with 3M self-adhesive tape, which ensures secure fastening to the trunk.
Attention!
Before assembly, thoroughly clean the trunk surface.
The kit contains:
Spoiler – 1 piece.
Assembly instructions.
Material: high-quality carbon fiber.








